Features and Benefits:
- 6,000 lbs. Capacity
- Portable
- Low Profile Design
- Rigid Base Construction
- Built in Drive-over Ramps
- Single Point Lock Release
- Two-Stage Telescoping Swing Arms
- Locking Arm Restraints
- Lifting Height: 5? 11 2/3? (71 2/3?)
- 110volt Electric Operation (30 AMP BREAKER REQUIRED)
- Free 8 Piece Truck Adapter Set
- Includes Double Screw-up Adapters
- Shipping Weight: 1,900 lbs.
- 2 yr Structural ‐ 1 yr Hydraulic Warranty ‐ Parts Only
- This part number FREIGHT PREPAID
The Atlas® PSP-6000 portable single post lift is the perfect choice for the commercial service shop or the Mr. Homeowner who does not want to tie up a bay space with a permanently mounted above ground lift. This portable vehicle lift allows the operator to walk under the vehicle or move around the vehicle to perform wheel service. When the Atlas PSP-6000 is not in use, it may be rolled out of the way into a corner. The PSP-6000 also has a built-in ramp allowing vehicles to drive over it, further maximizing garage space.
The Portable Single Post Lift rolls easily on a level concrete surface and can be used either inside or outside of your garage. The column fits under a 9 foot (108 inch) ceiling and allows the operator to raise most vehicles high enough to access many parts of the vehicle that would not be accessible with a mid-rise lift.
The Atlas® PSP-6000 column is equipped with the chain break mechanism that automatically locks the carriage into place in the unlikely event of a chain failure.
Atlas® PSP-6000 Specifications
- Capacity 6,000 LB.
- Overall Height 102 3/4" (8' 6 3/4")
- Max. Lifting Height (Without Truck Adapters) 71 2/3" (5' 11 2/3")
- Max. Clearance 68" (5' 8")
- Minimum Height 5"
- Overall Maximum Dimensions L: 111 1/2" x W: 96" x H: 102 3/4"
- Column Size 10 1/2" x 12 1/2"
- Distance Between Lifting Pads (Column Side to Offside) 39 1/2" to 81"
- Distance Between Lifting Pads (Column Side to Column Side) 53" to 73"
- Distance Between Lifting Pads (Offside Side to Offside) 54 1/3" to 91 1/2"
- Motor/Electric Requirement 110volt, 30 amp breaker required
- Oil Requirement 3-5 Gallons AW32 or AW46 (NOT INCLUDED)
- Shipping Weight 1,900 lbs.
- Adapter Heights 4 Each 2.75", 6”
- Arm Hole/Adapter Peg Size 2”
Your Auto Lift ships on a LTL common carrier freight company. It is taken to your location on a 48 foot semi truck. Please note the following before making your purchase:
You are responsible for unloading the lift from the truck. The truck driver does not unload it for you.
Lift Gate delivery service is not available for auto lifts.
You cannot unload an auto lift from the truck by hand. You must have machinery that can lift the full weight on your auto lift for unloading from the truck. Fork Lift, Bobcat, Tractor, Tow Truck, Back Hoe are all good options.
If you cannot unload from a truck, we can ship to our carrier's nearest freight terminal for you to pickup with a trailer or moving van.
You are responsible for calling the freight company to make a delivery appointment. We don't know your schedule so we can't do this for you.
Free shipping does not include shipping to Government Secure Locations, State and National Parks, Construction Sites, Islands, Alaska or Hawaii.
When your lift ships, we will email you the carrier information and tracking number. Freight shipping is slower than small package shipping and can take 3-14 days depending on your location so please be patient.
Cancellations & Refunds: At Car Lift Nation, we pride ourselves on having the best return policies in the industry. Cancel your order any time before it ships completely free of charge (exceptions apply such as custom orders, see below).
If you have questions, please send an email to support@carliftnation.com or call us at (620)202-7711.
Cancellations (Before Order Ships)
If you need to cancel an order, please contact us as soon as possible so we can refund you in full before your order leaves the warehouse. Reach agents during business hours at (620)202-7711, the chat in the bottom right, or email support@carliftnation.com any time.
Cancellations of Custom Orders
Custom or made to order products cannot be canceled or refunded as these products are put into production specifically for your order.
These units are custom made to your specification or created once you order. Once you place your order they start building your unit. Your warranty will guarantee you a fully functional and operational product. If it is not clear whether your order is custom or made to order, please message or call us.
All sales are final for Custom made and Made to order products.
Refunds and Returns
If you need to exchange your product, you may do so. You, as the customer, are responsible for any shipping costs throughout any returns and exchange processes.
Not all orders are available for return once they have shipped. We order our products directly from the manufacturer. Therefore, if the manufacturer will not permit us to return a product, we cannot offer you a return. This often varies on a case-by-case basis; please reach out to us if you would like specific information on your brand and/or product.
Due to increasing LTL/freight shipping costs, any outright returns will incur a 25% cancellation fee + return shipping costs. If you are replacing the product with something else, we may be able to help you cover some of the costs depending on the product.
Customers have 30 days from the date they received the item to initiate a return, however, please check the specific return policy for the brand of product you are purchasing as the brand specific return policy on the product page overrides this general return policy of 30 days.
