The Atlas Garage PRO9000 combo pairs the highest-capacity lift in the Atlas Garage PRO series with two RJ-45A rolling bridge jacks — turning a portable storage and service four-post into a rolling wheel-and-brake station. The lift is rated 9,000 lbs; each RJ-45A jack is rated 4,500 lbs. Together they handle everything from a Smart Car to a diesel dually.
The PRO9000 runs on standard 110V power (30-amp breaker required), is free-standing — no anchoring required — and rolls on an included caster kit so it can move when the floor plan changes. The runways are extra-long to fit longer-wheelbase vehicles, and extra-wide so full-size duallys can drive on without their tires riding the runway edges. Extra column height makes it possible to park anything from a Smart Car to a dually both below and on the runways.
Extra-long 17-foot runways (18'11½" with approach ramps).
The two RJ-45A bridge jacks ride on the runways and span the gap between them. Air/hydraulic operation lets a tech raise a vehicle's wheels off the runway for tire and brake service on the same lift the car is already parked on. Adjustable support arms fit lifts with 35" to 54½" between runways, so the jacks aren't tied to the PRO9000 — they work across most four-post platforms in that runway range.
Features
Atlas Garage PRO9000 four-post lift
9,000-lb lifting capacity
Free-standing, portable design — no anchoring required
Lock ladder, single-point lock release, and metal-braided hydraulic hose.Nylon rollers for smooth movement; steel wheel for durability.
RJ-45A rolling bridge jacks (×2 included)
4,500-lb lifting capacity per jack
Air/hydraulic operation (external air supply not included)
Two locking heights: 7⅜" and 10½"
Max lifting height with adapters: 18½" (may vary by lift)
Min height above runway: 3¾" (may vary by lift)
Arm adjustment: 39½" to 64¾"
Fits lifts with 35" to 54½" between runways
Height adapters and rubber lift pads included
Max lifting height with adapters: 18½". Two locking positions.Includes a 4-piece truck adapter set with on-board holder.Adapter kit: 4¾" rubber pad, two 1⅜" lift pads, two 1¼" adapters, two 5" adapters.
What's Included
(1) Atlas Garage PRO9000 four-post lift with 110V power unit
(2) RJ-45A rolling bridge jacks with adapter kits
Caster kit with polyurethane wheels (lift)
Steel approach ramps
Steel jack tray
4 plastic drip trays
2 rubber wheel chocks
Included caster kit. Do not move the lift with a vehicle on the runway.Diamond-plate steel approach ramps (31" × 31½" × 19⅞").Four plastic drip trays sit between the runways (39" × 24" each).Rubber wheel chocks (6" × 5½" × 3¼"), two included.
95¾" (7'11¾"), ±2" depending on thread adjustment and floor pitch
Top of runway
85" (7'1")
Clearance under runways
80½" (6'8½")
Overall length with approach ramps
227½" (18'11½")
Overall length without ramps
204" (17')
Length between columns
184½" (15'4½")
Overall width with motor
131½" (10'11½")
Overall width without motor
123½" (10'3½")
Width between columns
110½" (9'2½")
Drive-through width
79" (6'7")
Runway width (inner)
19⅞"
Distance between runways (center-to-center)
35½"
Runway thickness
4¾"
Runway gauge
5 gauge (.2" / 1/5" / 5mm) steel
Column footprint
11½" × 11½" base plate; 7½" × 4½" column
Approach ramp
31" × 31½" × 19⅞"
Drip tray
39" × 24", four included
Wheel chock
6" × 5½" × 3¼", two included
Shipping crate
202¼" × 28¼" × 21½"
Shipping weight
2,300 lbs
Warranty
2-year structural / 1-year hydraulic, parts only
Atlas RJ-45A Rolling Bridge Jack Specifications (×2 included)
Lifting capacity (each)
4,500 lbs
Operation
Air/hydraulic (external air supply not included)
Max lifting height with adapters
18½"
Min height above runway
3¾"
Locking heights
7⅜" and 10½"
Arm adjustment range
39½" to 64¾"
Compatible runway spacing
35" to 54½" between runways
Shipping crate (each)
39½" × 23½" × 12½"
Shipping weight (each)
380 lbs
Heights may vary by lift.
Footprint & Dimensions
Top view: 110½" between columns, 97¼" drive-through, 19⅞" inner runway width.Side profile with a Silverado dually loaded: 95¾" tall, 227½" long.80½" of clearance under the runways with the 110V power unit on the column.Single-point lock release handle and 110V power unit, viewed from the front.80¼" below runway, 85" to top of runway.Steel jack tray sits between the runways: 39" × 4½".Column base plate: 11½" × 11½".RJ-45A arm width extension: 30" to 60½".
Logistics & Delivery
This combo ships freight in three crates: one for the lift and one for each RJ-45A bridge jack.
Your Auto Lift ships on a LTL common carrier freight company. It is taken to your location on a 48 foot semi truck. Please note the following before making your purchase:
You are responsible for unloading the lift from the truck. The truck driver does not unload it for you.
Lift Gate delivery service is not available for auto lifts.
You cannot unload an auto lift from the truck by hand. You must have machinery that can lift the full weight on your auto lift for unloading from the truck. Fork Lift, Bobcat, Tractor, Tow Truck, Back Hoe are all good options.
If you cannot unload from a truck, we can ship to our carrier's nearest freight terminal for you to pickup with a trailer or moving van.
You are responsible for calling the freight company to make a delivery appointment. We don't know your schedule so we can't do this for you.
Free shipping does not include shipping to Government Secure Locations, State and National Parks, Construction Sites, Islands, Alaska or Hawaii.
When your lift ships, we will email you the carrier information and tracking number. Freight shipping is slower than small package shipping and can take 3-14 days depending on your location so please be patient.
Cancellations & Refunds: At Car Lift Nation, we pride ourselves on having the best return policies in the industry. Cancel your order any time before it ships completely free of charge (exceptions apply such as custom orders, see below).
If you have questions, please send an email to support@carliftnation.com or call us at (620)202-7711.
Cancellations (Before Order Ships)
If you need to cancel an order, please contact us as soon as possible so we can refund you in full before your order leaves the warehouse. Reach agents during business hours at (620)202-7711, the chat in the bottom right, or email support@carliftnation.com any time.
Cancellations of Custom Orders
Custom or made to order products cannot be canceled or refunded as these products are put into production specifically for your order.
These units are custom made to your specification or created once you order. Once you place your order they start building your unit. Your warranty will guarantee you a fully functional and operational product. If it is not clear whether your order is custom or made to order, please message or call us.
All sales are final for Custom made and Made to order products.
Refunds and Returns
If you need to exchange your product, you may do so. You, as the customer, are responsible for any shipping costs throughout any returns and exchange processes.
Not all orders are available for return once they have shipped. We order our products directly from the manufacturer. Therefore, if the manufacturer will not permit us to return a product, we cannot offer you a return. This often varies on a case-by-case basis; please reach out to us if you would like specific information on your brand and/or product.
Due to increasing LTL/freight shipping costs, any outright returns will incur a 25% cancellation fee + return shipping costs. If you are replacing the product with something else, we may be able to help you cover some of the costs depending on the product.
Customers have 30 days from the date they received the item to initiate a return, however, please check the specific return policy for the brand of product you are purchasing as the brand specific return policy on the product page overrides this general return policy of 30 days.
